Datalogic Scanning DS2200 User Manual download pdf (Page 23)

INSTALLATION

2.3.5 Outputs

Two general purpose outputs are available. These outputs can only be connected as

open collector configurations. The following pins are present on the connector of the

scanner:

Pin Name Function

8 OUT1+ output 1 +

11 OUT2+ output 2 +

10, 12, 22 I/O REF I/O reference

The meaning of the two outputs OUT1 and OUT2 can be defined by the user (No

Read, Right or Wrong). Refer to the WinHost Help On Line.

By default, OUT1 is associated with the No Read event, which activates when the

code signaled by the External Trigger is not decoded, and OUT2 is associated with

the Right event, which activates when the code is correctly decoded.

DS2200

USER INTERFACE

Vext

50 Vdc max, 50 mA max.

8/11

10/12/22

I/O REF

Figure 9 - DS2200 output connections

max = 50 Vdc

I max = 50 mA continuous

These outputs are both level or pulse configurable.

2.4 POSITIONING

The DS2200 scanner is able to decode barcode labels at a variety of angles,

however significant angular distortion may degrade reading performance.

When mounting the DS2200 take into consideration these three ideal label position

angles: Pitch 0°, Skew 15° to 30° and Tilt 0°.

Follow the suggestions for the best orientation:

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 40 41

No comments

Datalogic Scanning DS2200 User Manual Page 23